VISA® Paint Remover (450ml) is a powerful, fast-acting solution specially formulated to strip away old, stubborn paint, varnish, and tough coatings from metal, wood, concrete, and other surfaces. Whether you’re a professional painter, contractor, or DIY enthusiast, VISA® Paint Remover delivers outstanding performance, making surface preparation faster, easier, and more effective.
High Strength Formula – Quickly dissolves multiple layers of oil-based, latex, and enamel paints.
Multi-Surface Application – Works effectively on wood, metal, brick, and concrete.
Easy to Apply – Thick gel texture clings to vertical and horizontal surfaces for better coverage.
Fast Acting – Starts breaking down paint within minutes, reducing scraping time.
Residue-Free Finish – Leaves surfaces clean and ready for refinishing.
Constituents of VISA® Paint Remover
1. Methylene Chloride (Dichloromethane) – A powerful solvent that penetrates and lifts multiple layers of paint quickly.
2. N-Methyl-2-Pyrrolidone (NMP) – Often used in safer formulations; dissolves resins and varnishes.
3. Toluene or Xylene – Hydrocarbon solvents that aid in breaking down oil-based paints and varnishes.
4. Ethanol / Isopropanol – Helps dissolve shellac and water-based coatings.
5. Caustic Soda (Sodium Hydroxide) – Effective in breaking down old, tough coatings, especially on wood and metal.
6. Acetone – Fast-evaporating solvent that enhances penetration and speeds up paint removal.
7. Thickeners (e.g., Cellulose Derivatives) – Give the remover a gel or paste form so it clings to vertical surfaces.
8. Surfactants – Improve wetting and spreading on surfaces.
9. Water (in water-based / eco-friendly formulas).
1. Preparation :
Work in a well-ventilated area or outdoors.
Wear protective gloves, goggles, and a mask to avoid skin, eye, and fume exposure.
Cover nearby surfaces with plastic sheets or newspapers to protect them from spills.
2. Surface Check:
Ensure the surface is dry and free from dust, grease, or loose dirt.
For best results, test the remover on a small hidden area first.
3. Application:
Shake or stir the container (if recommended).
Apply a generous, even coat of VISA® Paint Remover using a brush or spatula.
For vertical surfaces, use a thick layer to prevent dripping.
4. Waiting Time:
Allow the remover to sit for 5–20 minutes, depending on the type and number of paint layers.
You’ll notice the paint bubbling, blistering, or softening.
5. Removal:
Scrape off softened paint with a paint scraper, putty knife, or steel wool.
For stubborn or multiple layers, reapply and repeat the process.
6. Cleaning:
Wash the stripped surface with warm soapy water or a neutralizing solution (if specified).
Allow the surface to dry completely before sanding, priming, or repainting.
7. After Use:
Reseal the container tightly.
Store in a cool, dry place away from direct sunlight, flames, or heat sources.
Dispose of used remover and paint scrapings according to local waste regulations.
—
⚠️ IMPORTANT SAFETY TIPS
Do not smoke or use near open flames.
Avoid contact with skin and eyes.
Keep out of reach of children.
CUSTOMERS’ CHATS
