VISA® GOLD RUBBER SOLUTION GUM is a high-performance vulcanizing adhesive specially formulated to deliver strong, flexible, and permanent bonds between rubber surfaces. Designed for use with cold patches, this fast-acting gum is trusted by professional vulcanizers for repairing tyre inner tubes, especially in motorcycles, tricycles, bicycles, and other commercial applications.
Whether you’re working in a roadside shop or a busy repair center, VISA® GOLD ensures every patch sticks with confidence — and stays sealed under pressure.
Key Features:
• Strong Vulcanizing Bond: Reacts chemically with cold patches to create a durable, airtight seal.
• Fast-Drying Formula: Dries quickly for efficient repairs — ready for patching in 3–5 minutes.
• Cold Application: No heat required! Perfect for field or workshop use.
• Smooth & Easy Application: Comes in a squeezable, easy-to-use container for clean and precise spreading.
• Reliable in All Climates: Maintains excellent bonding strength in hot, humid, or cold conditions.
Ideal For:
• Tyre Inner Tube Repairs,
• Motorcycle, Tricycle & Bicycle Tubes,
• Use with VISA® Cold Patches or other rubber patches,
• Roadside and Workshop Vulcanizers.
VISA® GOLD RUBBER SOLUTION GUM is the professional’s choice for quick, strong, and dependable tube repairs. When performance matters, trust the gold standard in rubber adhesive.
Stick with strength. Stick with VISA®.
• Natural Rubber or Synthetic Rubber (e.g., Butyl Rubber or Polyisoprene):
Acts as the primary bonding agent. It forms the adhesive film that fuses with the patch and tyre tube during cold vulcanization.
• Organic Solvents (such as n-Hexane, Heptane, or Cyclohexane):
Serve as the carrier liquid. These solvents keep the rubber compound in a fluid state for easy application and evaporate quickly after use to leave a tacky surface.
• Tackifiers and Resins:
Added to increase the initial stickiness (“tack”) and improve the bonding strength between the rubber solution and the patch or tube.
• Vulcanization Accelerators:
Small amounts of chemicals that trigger and enhance the cold vulcanization reaction, ensuring a strong chemical bond between the surfaces.
• Antioxidants and Stabilizers:
Help prevent oxidation and degradation of the rubber solution during storage, improving shelf life and performance consistency.
Follow these steps for best results when repairing tubes with VISA® GOLD RUBBER SOLUTION GUM:
• Step 1: Locate and Mark the Puncture
Inflate the tube slightly.
Submerge in water or listen for escaping air.
Mark the puncture area clearly.
• Step 2: Prepare the Surface
Deflate the tube completely.
Clean the surface using a dry cloth to remove dirt or moisture.
Lightly roughen the marked area with sandpaper or a grater to improve adhesion.
• Step 3: Apply Rubber Solution
Shake the container well before use.
Using a brush or nozzle, apply a thin, even layer of VISA® GOLD RUBBER SOLUTION GUM to the prepared area.
Allow the solution to dry until tacky (approximately 3–5 minutes).
• Step 4: Apply the Patch
Peel off the foil backing from the cold patch (e.g., VISA® COLD PATCH).
Firmly press the patch onto the tacky area, ensuring full contact and no trapped air bubbles.
Apply pressure for 30–60 seconds to ensure a tight bond.
• Step 5: Cure and Test
Allow the patch to cure for at least 5–10 minutes.
Re-inflate the tube slightly and submerge in water to check for leaks.
SAFETY PRECAUTIONS:
To ensure safe handling and use of VISA® GOLD RUBBER SOLUTION GUM, please observe the following:
• Flammable
Contains petroleum-based solvents such as hexane or heptane.
• Keep away from open flames, sparks, and high heat.
• Use in a Ventilated Area:
Vapors may cause dizziness or irritation.
• Use in well-ventilated spaces or outdoors.
Avoid inhaling fumes directly.
• Avoid Skin and Eye Contact
Wear protective gloves if available.
In case of contact with skin: wash immediately with soap and water.
• In case of eye contact: flush with water and seek medical help.
• Keep Out of Reach of Children
Store in a secure, childproof location.
Do not ingest or leave open containers unattended.
• Proper Storage:
Store in a cool, dry place, away from sunlight and ignition sources.
Keep the container tightly closed after use.
• Environmental Caution:
Do not dispose of in open drains or soil.
Follow local disposal regulations for chemicals.
[vicilook_product_add_button]
CUSTOMERS’ CHATS
