ORIGIN BRAKE FLUID DOT3 (500ml)
A Precision Hydraulic Performance for Total Road Confidence.
ORIGIN Brake Fluid is a premium-grade hydraulic solution designed for the modern driver. Engineered to deliver rapid response and uncompromising safety, this 250ml formula ensures your braking system remains responsive under the most demanding driving conditions.
Why Choose ORIGIN BRAKE FLUID DOT 3?
Vapor Lock Resistance:Formulated with a high boiling point to maintain solid pedal pressure, even during frequent braking or steep descents.
System Longevity: Contains specialized inhibitors that prevent internal corrosion and oxidation within the brake lOptimal Viscosity: Flows consistently across a wide temperature range, ensuring smooth operation in diverse climates.
Component Care: Specifically balanced to be gentle on rubber seals and gaskets, reducing the risk of leaks.
Product Details
250ml Compact Bottle (Ideal for top-ups)
Compatibility:Suitable for most disc and drum braking systems.
Performance: Meets and exceeds standard safety requirements for hydraulic fluids.
Brake fluid is hygroscopic (absorbs moisture). For maximum safety and performance, ensure the cap is tightened immediately after use and store in a cool, dry place.
ORIGIN Brake Fluid utilizes a complex chemical blend designed to maintain hydraulic integrity under extreme thermal stress. The primary components include:
Polyglycol Ethers: The main lubricating base that ensures consistent fluid movement.
Glycol Ether Solvents: High-boiling point agents that prevent “vapor lock” by keeping the fluid in a liquid state at high temperatures.
Corrosion Inhibitors: Chemical buffers that neutralize acidity and prevent the rusting of metal brake lines and cylinders.
Antioxidants: Additives that prevent the thermal breakdown of the fluid over time.
PH Stabilizers: Formulated to protect internal rubber seals and gaskets from swelling or shrinking.
Safety Note: This fluid is harmful if swallowed and can damage vehicle paintwork on contact. Always wash spills immediately with water.
To ensure the safety and efficiency of your vehicle’s braking system, follow these steps for applying ORIGIN Brake Fluid (250ml):
1. Preparation
Locate the Reservoir: Open your hood and find the brake master cylinder reservoir (usually a translucent plastic container near the firewall on the driver’s side).
Clean the Cap: Before opening, wipe the reservoir cap and surrounding area with a clean rag. This prevents dirt or grit from falling into the hydraulic system.
2. Checking the Level
Observe the “MIN” and “MAX” lines on the side of the reservoir. If the fluid level is near or below the “MIN” mark, a top-up is required.
3. Application
Open Carefully: Unscrew the cap. If the bottle has a foil seal, puncture it cleanly.
Pour Slowly: Add ORIGIN Brake Fluid into the reservoir until the level reaches the “MAX” line. Do not overfill.
Protect Paint: Immediately wipe away any accidental spills on the car’s bodywork with a wet cloth, as brake fluid can strip paint.
4. Finalizing
Seal Tightly: Replace the reservoir cap immediately to prevent the fluid from absorbing moisture from the air.
Test the Pedal: With the engine off, pump the brake pedal a few times to ensure it feels firm and responsive.
Important Note: For a complete system flush or if you notice a “spongy” pedal feel, we recommend consulting a certified mechanic to perform a full brake bleed to ensure no air remains in the lines.
